GT Power V5 balance Charger for Li-ion / Polymer Ni-MH / Ni-Cd Lead Acid Battery

Battery Charger Adapter

Features:

• Individual cell voltage balancer for lithium batteries inside:

• G.T. POWER V5 has an individual-cell-voltage balancer built in so it does not need a separate balancer when charging LiPo batteries.

Maximum safety

• Delta-peak sensitivity. The automatic charge termination program works on the principle of the Delta-peak voltage detection.
• Capacity limit: The charging capacity always calculated by multiple of the charging current and time. If the charging capacity exceeds the limit the process will be raise by its internal chemical reaction. If you set the limit of temperature the process will be expires forcibly when the limit has reached.
• Processing time limit: You can also restrain the maximum process time to prevent from any possible defect.
• Input power monitor: To protect the car battery using as input power from being damaged the voltage of it always monitored. If it drops below the lower limit the process will be ended automatically.

Specification:

• V5 employs the circuit that has maximum output power of 50W. As a result it can charge up to 14cells of NiCd Battery and NiMH Battery and 5series of Lithium Polymer Battery with maximum current of 5.0A.
• Operating voltage range: 11.0-18.0V
• Circuit power: max.50W
• Charge current range: 0.1-5.0A
• Current drain for balancing LiPo: 200mAh/cell
• NiCd/NiMH battery cell count: 1-14 cell
• Li-Ion/Polymer cell count: 1-5 Series
• Lead Acid Battery voltage: 2 to 12V
• Size: 12.9 x 9.7 x 2.4cm
• Weight: 467g

Package contents:

• 1 x GT Power V5 balance Charger for Li-on/Polymer NI-MH/Ni-Cd Lead Acid Battery
• 1 x manual
• 1 x output power cable
• 1 x balance charging socket power cable

Battery Charger Adapter