Product Name:DC Motor Speed Control Switch
Working voltage: DC 10V-30V(10V 12V 24V 30V)
PWN Frequency :500zHz.
Control Power : 12V*3A=36W,24V*3A=72W,More than 24A(Max.120W)
Speed range: 5%-95%
Material: Plastic, metal
Size (L*W*H):74mm x 47mm x 28mm
Potentiometer Resistance Value B10K
Mounting Hole Size:8mm
•High efficiency, high torque, low heat generating
•Control the speed of a DC motor with this controller
•With reverse polarity protection, high current protection
•With reversible switch
1 x DC Motor Speed Control Switch
1.The DC Speed Governor is input with direct current. It can not be input with alternative current directly such as household 220V alternative current.
2. Connect it to the power, ensure the positive inversion switch located in the middle of the zero, and connected with a DC power supply(the DC supply voltage range is more than 6V and less than 30V). Warning: do not reverse the positive and negative terminals of DC power source, otherwise regulator may be damaged.
3. Connect it to the motor, the motor line can be positive or negative, when the running direction is not consistent with the expectative one, you can adjust the sequence of lines or switch position to change the direction.
4. Adjust the switch. Positive inversion switch is used to control the motor speed direction. When the switch is located on the zero position, the motor stops rotating.
5.Adjust the potentiometer knob. Adjusting potentiometer knob can change output duty ratio of the regulator, then motor speed change.
|Country of Manufacture||CHINA|
|Material||Plastic & Electronic Parts & Metal|
|Package Content||1 x DC Motor Speed Control Switch|
|Manufacturer Part Number||Does Not Apply|
|MPN||Does Not Apply|