M3+M3-3A RF Wireless LED Full Color RGB Controller for LED Light Strip Tape

Specifications:

Receiver Parameter

Competible Remote: M3/M6/M7

Power Input: 12V-24V DC

Max. Current Load: 3Ax3CH, Max. 9A

Max. Output Power: 108W(12V)/216W(24V)

Working Temp.:-30C to 55C

Demensions: L135 x W30mm x H20(mm)

Net Weight: 47g

Remote Parameter:

Working Voltage: 3V(Battery CR2032)(Here is inclded)

Working Frequency: 433.92MHz

Remote Distance: 40 Meters to 50 Meters

Working Temp.:-20C to 55C

Remote Demensions: L104 x W58mm x H9(mm)

Remote Holder Demensions: L108 x W63mm x H14(mm)

Net Weight: 47g

Package Content:

1 x Receiver

1 x Remote Controller

Descriptions:

The RF Wireless LED Controller is a solution for LED lighting. The RF signal can penetrate doors, walls and other materials, meaning you can hide your receiver in a cabinet, inside a wall or even in the next room. 

Features:

-RF remote is fashionable, slim, light and easy to carry while receiver is small, exquisite and easy to install.

-RF remote with low power consumption, long distance, strong obstructions penetrating ability, independent ID interference-free and other properties.

-One receiver compatible with ten different functions of the remote, that is use one receiver can experience dimming, color temperature and RGB control.

-RF remote is simple and intuitive to use, a variety of actions , what you see is what you get.

-Automatic sleep mode, when the touch remote unattended operation over 30s, it can automatically enter standby mode to extend .

The Learning ID Method of Remote Control:

Remote control has been matched to the receiver before leave factory, if deleted accidentally, you can learn ID as follow.

Learning ID: Short press ID learning button on the receiver until the running light is on, then press any key on the remote control, the running light flashes several times, activated.

Cancel ID: Long press ID learning button on the receiver for 5 seconds.

Attn: one receiver can be matched with max 10 same or different kinds remote controllers. 

Note: Battery is not included.