Float Switch Water Liquid Fluid Level Square Controller Sensor 4M 250V 15(8)A

Features:

This 250V 15(8)A float switch liquid level controller with 4 M length cable design. 

It can be easily converted from normally open to normally close by inverting the float

As the liquid level reaches upper or lower switching value, the controller contact will adjust water level in barrel, tank or well automatically .

Note: Please pay attention to the voltage before ordering.

Specifications:

Material : Plastic

Switching Voltage: 250V

Switching Current : 15(8)A

Color : Yellow, Blue, Black

Cable Length : 4M / 13.1ft

Temperature Rating: -10 ~ 60℃

Cylinder Size : 69 x 47mm / 2.72 x 1.85 inch (H*D)

Floater Size: 100 x 76 x 42mm / 3.94 x 3 x 1.65 inch (L*W*H)

Package Content: 1 x Float Switch

Working principle:

When you use the black and brown wire,the state of the float switch is the water supply system;

When you use the black and blue wire,the state of the float switch is the water drainage system;

When using black and brown wires:

When the floating ball is at the lower level, the contact point is in the connection state .

When the floating ball is at the upper level, the contact point is in the disconnection state .

When using black and blue wires:

When the floating ball is at the upper level, the contact point is in the connection state .

When the floating ball is at the lower level, the contact point is in the disconnection state .