|
Features:
1.Multi-channel compressed air flow break control, easy to install and use.
2.It has large flow and simply structure. Easy to maintain and operate.
3.It is mainly used for on-off and shunt control of compressed gas in air compressor system, lift, pneumatic can making machine, train horn, pneumatic drilling machine, robot, etc.
How to Use:
Correspond to the thread specification of the trachea joint and muffler joint, wrap a proper amount of sealing tape and tighten.
NOTE:
1.Ensure that the thread size of the access hole and muffler hole is correct.
2.Thread size is G1/4, if using the corresponding G1/4 thread gauge to detect, there is no problem and can be well matched; if using caliper measurement, the corresponding thread hole diameter is about 11.5mm.
Specification:
Color : Black, Silver Material: Metal
Model: 3R210-08
Valve Type: 5 Position 2 Way
Air Flow Out Hole Size: G1/4
Voltage Range: +15%-25%
Operation Rate(Max): 5 cycle/sec
Excitation Time: 0.05 scc
Working Pressure: 0.15 - 0.8 Mpa
Operating Temperature: 5℃ to 50℃
Total Size : 8.5 x 3.5 x 2.1cm / 3.3 x 1.4 x 0.8 Inches (L*W*H)
Package Content:
1 x Hand Pull Valve
|
